Question 2: "write term" "Sim, CT (Chee Tong)" wrote:I keep having the following log in my PIX. It is very frequent. What is that mean? It seems my PIX deny this connection, but actually I want to allow it now and make it no longer log to the PIX log.
106011: Deny inbound (No xlate) udp src outside:200.100.182.173/58000 dst outside:192.168. 5.200/58000 106011: Deny inbound (No xlate) udp src outside:200.100.182.173/58000 dst outside:192.168. 5.200/58000 106011: Deny inbound (No xlate) udp src outside:200.100.182.79/58000 dst outside:192.168.5 .200/58001 106011: Deny inbound (No xlate) udp src outside:200.100.182.79/58000 dst outside:192.168.5 .200/58001 I tried to clear it by adding the following command in the PIX config to allow the connection to come in. However, I still found the same log in my PIX? What should be the correct command? conduit permit udp any range 58000 58001 any Question2- How to show the "running-config" in PIX? I found whenever I made a change on PIX. I can't see the change when I issue "sh conf" command until I do "wr mem" What is the router equivalent show running-config command in PIX? Thanks a lot ================================================================== De informatie opgenomen in dit bericht kan vertrouwelijk zijn en is uitsluitend bestemd voor de geadresseerde. Indien u dit bericht onterecht ontvangt wordt u verzocht de inhoud niet te gebruiken en de afzender direct te informeren door het bericht te retourneren. ================================================================== The information contained in this message may be confidential and is intended to be exclusively for the addressee. Should you receive this message unintentionally, please do not use the contents herein and notify the sender immediately by return e-mail. ================================================================== Do you Yahoo!? New DSL Internet Access from SBC & Yahoo! Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=53967&t=53953 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]