The 3 I have at home use a rollover cable... Steve Watson wrote:
>All the old 4000's I have use a straight through serial cable. > >Steve > >-----Original Message----- >From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] >Sent: Tuesday, September 24, 2002 3:12 PM >To: [EMAIL PROTECTED] >Subject: 4000 router console cable [7:53981] > > >I just acquired a 4000 router and can't get it to respond through the >console port. As usual in this case, I suspect I have a cable problem. I >thought I needed a straight through DB9-DB25 modem cable, but it doesn't >seem to work. I want to make sure I have the right cable before I start >chasing other possibilities. Is this in fact the right cable? I have >searched the archives and looked at several CCO links without a clear >answer (maybe I'm just not smart enough to understand what I'm reading >:-)). What I'd really like is something ultra-simple, like "db-25 pin2 >to db-9 pin3" and so on. Can anyone point that out to me? TIA. -- Larry Letterman Network Engineer Cisco Systems Inc. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=54014&t=53981 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
