Tried that! I _think_ the problem only showed up when I put the Enterprise IOS on my 2912-XL-A switch, although I might be wrong.
Infact, I'll blow the old IOS on and see if the problem goes away Cheers, Symon -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Sent: 25 September 2002 21:44 To: [EMAIL PROTECTED] Subject: Re: 2912 faulty ports [7:54109] Try wiping out out the old config and start with a new. Also I work with a lot of 2912s and 2924s and for some reason we've replaced several 2912s after years of service due to bad ports. Let me know if it works : ) ""Symon Thurlow"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hi all, > > I have a 2912 that I have put enterprise IOS on. It complains about > ports 9-12 being unknown. > > Anyone seen this before? > > Cheers, > > Symon Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=54129&t=54109 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]