The possible causes I can thnk of are these : Use show process to find the process that is eating up the cpu cycles. Maybe you have your http port open on the router and the heavy load is the result of probing on port 80 for example through Nimda. Check your debugs maybe some debug is overloading the router. shutoff commpression on the wan links and check out the CPU load.
good luck afshion mehrpouya "kaushalender" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hi all router gru's > I have cisco 2610 suddenly the cpu load of the router has increased from 15 > 58 % I dont know why ??? .BUt I know thats is because of traffic when i > shut down the ethernet the load comes down .But i dont know From where this > traffic is coming .When i see the mrtg some unusal grafh is there like > voice traffic is passing through .Can we see or block the voice traffic in > router .I unusall thing it that when load start increasing my uplink gets > havelly used near to choked rather than downlink .If i ping my ethernet i > get huge amount of packet loss.Can Some body help me regarding this. Plz > help me > > Thanx in advance > Kaushalender Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=54191&t=54175 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]