If I take 4 Catalyst 3500 Series Switches and configure in a GigabitStack Module then I would assume that I am creating a one virtual switch and all the backplanes of the switches should combine the total speed of switching backplane. Am I correct or it is a samething you are connecting two swiches through crossover and dividing the bandwidth. If my assumptions are correct then the STP run only on those ports which will be uplink to (2) 6509 layer 3 switches. One in forwarding mode and the other one in blocking mode. The GigabitStack ports between the four switches should not be in either a forwarding or blocking port since they are just being used creat a big one virtual switch from the 4 seperate physical switches. If my assumptions are incorrect then what is the benefit of using stacking modules and diving the bandwidth instead of combining them. I would then rather connect each 3500 directly to 6509 switch. Thanks Teza
------------------------------------------------ Changed your e-mail? Keep your contacts! Use this free e-mail change of address service from Return Path. Register now! Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=54278&t=54278 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]