I am getting an MCP COMM: F on this SUP III. Does anyone have any
suggestions. I tried searching Cisco's site but no luck.
Thanks, Jeff
Console> (enable) show ver
WS-C5000 Software, Version McpSW: 6.3(3) NmpSW: 6.3(3)
Copyright (c) 1995-2001 by Cisco Systems
NMP S/W compiled on Oct 30 2001, 10:37:00
MCP S/W compiled on Oct 30 2001, 10:31:46
System Bootstrap Version: 3.1.2
Hardware Version: 1.9 Model: WS-C5000 Serial #: 010105958
Mod Port Model Serial # Versions
--- ---- ---------- --------- ----------------------------------------
1 4 WS-X5530 010105958 Hw : 1.9
Fw : 3.1.2
Fw1: 4.2(1)
Sw : 6.3(3)
WS-F5521 010436254 Hw : 1.0
WS-U5538 012752969 Hw : 1.0
DRAM FLASH NVRAM
Module Total Used Free Total Used Free Total Used Free
------ ------- ------- ------- ------- ------- ------- ----- ----- -----
1 65536K 21613K 43923K 8192K 5976K 2216K 512K 185K 327K
Uptime is 0 day, 0 hour, 1 minute
Console> (enable) show test 0
Diagnostic mode at next reset: complete
System Diagnostic Status : (. = Pass, F = Fail, N = N/A)
Module 1
EARL II Status :
DisableIndexLearnTest: U
DontLearnTest: U
DisableNewLearnTest: U
ConditionalLearnTest: U
MonitorColorFloodTest: U
EarlTrapTest: U
StaticMacAndTypeTest: U
BadDvlanTest: U
BadBpduTest: U
IndexMatchTest: U
ProtocolTypeTest: U
IgmpTest: U
SourceMissTest: U
SourceModifiedTest: U
ArpaToArpaShortcutTest: U
ArpaToSnapShortcutTest: U
SnapToArpaShortcutTest: U
SnapToSnapShortcutTest: U
SoftwareShortcutTest: U
MulticastExpansionTest: U
DontShortcutTest: U
ShortcutTableFullTest: U
Module 1 : 4-port 100BaseFX MMF Supervisor
Loopback Status [Reported by Module 1] :
Console> (enable) show test 1
Diagnostic mode: complete (mode at next reset: complete)
Module 1 : 4-port 100BaseFX MMF Supervisor
Network Management Processor (NMP) Status: (. = Pass, F = Fail, U = Unknown)
ROM: . Flash-EEPROM: . Ser-EEPROM: . NVRAM: . MCP Comm: F
EARL II Status :
DisableIndexLearnTest: U
DontLearnTest: U
DisableNewLearnTest: U
ConditionalLearnTest: U
MonitorColorFloodTest: U
EarlTrapTest: U
StaticMacAndTypeTest: U
BadDvlanTest: U
BadBpduTest: U
IndexMatchTest: U
ProtocolTypeTest: U
IgmpTest: U
SourceMissTest: U
SourceModifiedTest: U
ArpaToArpaShortcutTest: U
ArpaToSnapShortcutTest: U
SnapToArpaShortcutTest: U
SnapToSnapShortcutTest: U
SoftwareShortcutTest: U
MulticastExpansionTest: U
DontShortcutTest: U
ShortcutTableFullTest: U
Line Card Diag Status for Module 1 (. = Pass, F = Fail, N = N/A)
CPU : . Sprom : . Bootcsum : . Archsum : .
RAM : . LTL : . CBL : . DPRAM : . SAMBA : F
Saints : . Pkt Bufs : . Repeater : N FLASH : .
Phoenix : . TrafficMeter: . UplinkSprom : . PhoenixSprom: .
Samba Fail Info : 0xd 0 0 0
SAINT/SAGE Status :
Ports 1 2 3 4
-----------------
. . . .
PHOENIX Port Status :
Ports 9 17 18 19 20 21 22
INBAND A->B B->A B->C C->B A->C C->A
------------------------------------------
. . . . . . .
Packet Buffer Status :
Ports 1 2 3 4
-----------------
. . . .
PHOENIX Packet Buffer Status :
Ports INBAND AB BC AC
------------------------------
. . . .
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=54346&t=54346
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
