Hello all, I have an ISDN line set up for vendor support. It is dedicated to one vendor. They are always the one to initiate the call, their system does not allow incoming calls. They are telling me that I have to set the thresholds on my router(Cisco 2620). I have never heard of the receiving side asking for the second connection and can't find any commands either. The only command I see is the dialer load-threshold command and that's for dial out. Am I missing something? Any thought? Thanks in advance!
Chris Dumais, CCNP, CNA Sr. Network Administrator NSS Customer and Desktop Services Team Maine Medical Center (207)871-6940 [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=54356&t=54356 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]