Hi John, I'm not sure whether using Key rotation, please advice where I can apply the LEAP? Please advice as I'm having trouble on this issue.
Once again, Thanks Rgds, Steiven ----- Original Message ----- From: "John Jackson" To: Sent: Thursday, September 26, 2002 9:30 PM Subject: RE: Aironet 350 MetalCase Bridge [7:54214] > I had this same problem. Are you using Key rotation without LEAP? That is > what my problem was. Now, it is my understanding that key rotation only > works when you also do LEAP. > > "Steiven Poh-\(Linear Online Mai wrote: > > > > Dear All, > > > > Currently, I already can establish communications between the > > two bridges. > > However , now we are facing some problems - the bridges seem to > > deauthenticate after the connection was being established after > > a period of > > 1 to 2 minutes. And follow with reauthentication and > > reassociation. > > The is scenaria keep looping ... > > > > Please advise on what resolution can be taken to overcome this > > problem. > > Thanks. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=54427&t=54214 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]