Has anyone out there ever configured a 7200 with a bridged OC3 interface that is then routed via a BVI?? The config is not the issue but can the router handle it as this link will be heavily used. Since the bridged to routed conversion is done in software I don't have a warm fuzzy about this but the customer doesn't understandably want to buy another router and just let the 7200 be a bridge.
If your wondering what the hell, this is for an LSS, LAN Switching Service, application which by tarriff is a fully meshed, bridged ATM service that extends 10 or 100M ethernet. Thanks Dave -- David Madland CCIE# 2016 Sr. Network Engineer Qwest Communications 612-664-3367 "You don't make the poor richer by making the rich poorer." --Winston Churchill Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=54828&t=54828 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]