Hi Paul,
With this command, will you be able to let's say ftp to the
outside IP and get forwarded to the ftp ports of the internal ip?
Daren
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of
Paul Msava
Sent: Thursday, October 03, 2002 7:28 PM
To: [EMAIL PROTECTED]
Subject: RE: NAT [7:54838]
Hi,
ip nat inside source static private public ip
./Msava
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Joe Middleton
Sent: Friday, October 04, 2002 3:23 AM
To: [EMAIL PROTECTED]
Subject: NAT [7:54838]
Hi All,
I am trying to set up NAT on a cisco 2600 router. Everything seems to
be working except that I can not access resources on the inside using
there public IP address from the inside. From the internet the router
translates the public addresses to private addresses, but from the
inside I have to use the private address to access any resource. How
can I get the router to translate requests that originate from the
inside? Any help would be greatly appreciated.
Thanks.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=54889&t=54838
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
