Every time I have had the orange alarm light on one of my WIC cards, AND I was sure that all the cabling and everything on my end was OK, I found that it was the carrier. I would have them do a thorough diagnostics and see if they can latch on to your CSU, etc. ""Wilson, Christian"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hi all > > I have a 1602R with a WIC-1DSU-T1 card installed. I am trying to bring up > the line, but the interface is down/down. The ISP swears that I have the > correct linecode, frame type, and other settings. A debug serial interface > shows: > > QUICC_Serial1: Reset from x45623q21 > > It keeps trying to restart and keeps getting reset with the above debug > code. I have checked the cables. The lights on the WIC are CD illuminated > and ALARM illuminated. I searched the archives and found someone had the > same problem back in april with the a 1603 and the same debug trace, but no > one replied. Please help! I have no where else to turn as I have no > maintenance on this router. Thanks
Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=55235&t=55234 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]