Greetings,

I have a problem/question regarding a current ATM Circuit.  Currently,
our ATM cloud connects 4 of our sites.   We submitted an order to add
another site into the cloud. The telco provided the vpi's but only two
sites communicate.


                            Site C
                              |
                              |
                              |
 Site A-----------   ATM CLOUD   ------------Site B
                              |
                              |
                              |
                            NEW Site

Sites a, b, & c communicate correctly.  The "NEW Site" was added but
(pvc's to all sites), but will only communicate with Site A. Teloc has
checked the VPI's and insists they are correct.  Which brings up another
strange item--All the VPI's were the same:

New site
Originating             Destination
90                              90
100                             100
80                              80

I have never noticed VPI's being the same on both ends,,Does this sound
correct?

OSPF is the routing protocol. But only "new site" and site a exchange
info.

Site A
interface ATM5/0/0
  ip address 192.68.135.66 255.255.255.240
 ip pim sparse-mode
 ip ospf authentication-key 7 05180702014D43
 ip ospf network non-broadcast
 map-group TEST
 atm pvc 1 35 40 aal5snap
 atm pvc 2 36 50 aal5snap
 atm pvc 5 95 95 aal5snap
 atm pvc 6 80 80 aal5snap
 no atm ilmi-keepalive

map-list TEST
 ip 192.68.135.65 atm-vc 1
 ip 192.68.135.67 atm-vc 2 broadcast
 ip 192.68.135.68 atm-vc 5 broadcast
 ip 192.68.135.68 atm-vc 6 broadcast



NEW Site
interface ATM3/0
 ip address 192.68.135.68 255.255.255.240
 ip ospf authentication-key 7 05180702014D43
 ip ospf network non-broadcast
 map-group TEST
 atm pvc 1 95 95 aal5snap
 atm pvc 2 100 100 aal5snap
 no atm ilmi-keepalive


map-list TEST
 ip 192.68.135.66 atm-vc 1 broadcast
ip 192.68.135.65 atm-vc 2 broadcast




Site C
interface ATM1/0/0
 ip address 192.68.135.65 255.255.255.240
 ip ospf authentication-key 7 010007097B0A0B4F
 ip ospf network non-broadcast
 map-group TEST
 atm pvc 1 40 40 aal5snap
 atm pvc 2 100 100 aal5snap
 atm pvc 3 37 60 aal5snap
 no atm ilmi-keepalive


map-list TEST
 ip 192.68.135.66 atm-vc 1
 ip 192.68.135.67 atm-vc 3
 ip 192.58.135.68 atm-vc 2 broadcast

Any help is greatly appreciated!




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=55238&t=55238
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to