Ole, it's been a long time for me as well, but isn't that last set of numbers - the four after the : ( colon ) the SPX socket number? That is the thing that appears to be changing.
Not that I would know what the change signifies. what's running on that workstation? -- ! ""Ole D Jensen"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Thanks Dave, > > I have tried that without any luck. > > The command is "reset router". > > Thanks, > > Ole > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > Ole Drews Jensen > Systems Network Manager > CCNP, MCSE, MCP+I > RWR Enterprises, Inc. > [EMAIL PROTECTED] > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > http://www.RouterChief.com > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > > > > > > > "Williams, Dave" > 10/10/2002 09:40 AM > > > To: 'Ole D Jensen' , [EMAIL PROTECTED] > cc: > Subject: RE: Novell Server node address change [7:55264] > > > You might try and clear the routing and network tables (I believe the > command is "clear routes" although it's been a while) on the server. This > will cause the server to resend SAPs to populate its tables. Sometimes > the routing tables on a Novell Server (especially 4.10) gets messed up and > won't dump the corrupted information. > Dave Williams, CCDA, CCNA, CCSA > Senior Network Engineer > (402) 661-2143 > > -----Original Message----- > From: Ole D Jensen [mailto:[EMAIL PROTECTED]] > Sent: Thursday, October 10, 2002 8:40 AM > To: [EMAIL PROTECTED] > Subject: OT: Novell Server node address change [7:55264] > > This is a good step off the Cisco topic, but since it is in the network > world, I'm sure at least one person on this list knows the answer. > I have an old Novell NetWare 4.10 running, and sometimes it start changing > > the address of one specific workstation. I have looked over and over at > the workstation to find a possible bug, but everything lookes fine, and > reinstalling the Novell Client has not changed anything. > Every 30 seconds, the Novell Server changes the node address back and > forth: > 10-10-02 8:20:00 am: Server-4.10-3191 > Server WORKSTATION_27 > Address has changed from 00000040:123456789012:1234 > to 00000040:123456789012:3412 > Information came from router at 123456789012 > 10-10-02 8:20:01 am: Server-4.10-3191 > Server WORKSTATION_27 > Address has changed from 00000040:123456789012:3412 > to 00000040:123456789012:1234 > Information came from router at 123456789012 > To avoid misunderstandings, the WORKSTATION_27 is the workstation that it > keeps changing the address on. I am not sure if it's the workstation > itself that changes this address or the server, but it also says that the > information came from router 123456789012 which is the workstation. > I'm sure there's a logical explanation for this. > Thanks in advance for any comments, > Ole > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > Ole Drews Jensen > Systems Network Manager > CCNP, MCSE, MCP+I > RWR Enterprises, Inc. > [EMAIL PROTECTED] > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > http://www.RouterChief.com > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=55271&t=55264 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]