Dream lab 2 3640s with 2 FE, 2 t1 serial ints, and ATM 155 (or 2621 with two wic-1ts, if ATM cannot be part of this dream)
3 2610s with two t1 serial 3 2611s with 2 t1 serial 2 2501s (to be used as backbone routers in scenarios like Ipexpert's) 1 2523 or 2522 as frame switch and third backbone router to connect to Voice equipment -- 2X NM-1V and 2X VIC-2FXS to move about among the 2600s or 2640s as needed 1 LS 1010 1 ISDN Simulator 2 3550s EMI Okay, it's not realistic, but he did say "dream lab". Just be glad I didn't make them all 3662s. Tom Larus, CCIE #10,014 ""Colin Weaver"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hi All, > > I'm looking for opinions on what you would do (buy) if you could build your > own "dream" CCIE home lab. What equipment would you get (Routing & > Switching CCIE)? > > I'm getting some mixed information on what equipment is actually used on the > CCIE lab scenarios. I've heard, for instance, that the Catalyst 5500 is > being replaced with the 6500. Does anyone know where an up-to-date > equipment list is? > > Thanks. > > -Colin > > P.S. - I'm still searching for ANY 5.x firmware for a Catalyst 1900. Help. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=55272&t=55266 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]