The image is working on other 3662 routers, but do are they the EXACT same configuration.
Do they all have exactly the same network modules and WIC cards in them? Are all of the module and cards the same code revision? I would try a different version of the IOS. -----Original Message----- From: Hamid Ali Asgari [mailto:[EMAIL PROTECTED]] Sent: Sunday, October 13, 2002 11:21 PM To: [EMAIL PROTECTED] Subject: Re: FW: URGENT: WRONG IOS-Problem booting a 3662 [7:55504] As I told ALL the images I used, are currently working on other 3662 routers Hamid > 3660 uses different ios then the rest of 3600 family. Seem like you > have ios for the wrong platform > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of > Hamid Ali Asgari > Sent: Sunday, October 13, 2002 5:04 PM > To: [EMAIL PROTECTED] > Subject: URGENT: WRONG IOS-Problem booting a 3662 [7:55504] > > Hi group, > > I have a Cisco 3662 router with 128 of RAM and 16 Mb of flash memory. > The > problem is that I cannot make the router boot !!!. Each time I boot the > router I get the folowing error. > I don't know why this error is displayed. I have tried replacing the > IOS several times. I have repleaced the flash memory but still it > doesn't work. > Does it have anything to do with Smart Init? I don't know what it is > and how it can be disabled> > Any input would be welcome, > > Thanks, > Hamid > > PS: The IOS that I have tested are currently running on other 3662s. > > ***************************************************************** > > System Bootstrap, Version 12.0(6r)T, RELEASE SOFTWARE (fc1) > Copyright (c) 1999 by cisco Systems, Inc. > C3660 processor with 131072 Kbytes of main memory > Main memory is configured to 64 bit mode with parity disabled > > program load complete, entry point: 0x80008000, size: 0xc26c18 > Self decompressing the image : > ######################################################################## > ######################################################################## > ######################################################################## > ######################################################################## > ######################################################################## > ######################################################################## > ######################################################################## > ######################################################################## > ######################################################################## > ######################################################################## > ######################################################################## > ######################################################################## > ######################################################################## > #######################################################! > ######################################################################## > ####################################################################### > [OK] > Smart Init is enabled > smart init is sizing iomem > ID MEMORY_REQ TYPE > 0000B3 0X0009FC00 Dual Port Fast Ethernet > 00006F 0X00012580 Sixteen port A/D Modem > 00006F 0X00012580 Sixteen port A/D Modem > 0X00280000 OIR memory > 0X0010A6F8 public buffer pools > 0X00211000 public particle pools > TOTAL: 0X0065FDF8 > > If any of the above Memory Requirements are > "UNKNOWN", you may be using an unsupported > configuration or there is a software problem and > system operation may be compromised. > Rounded IOMEM up to: 7Mb. > Using 5 percent iomem. [7Mb/128Mb] > > > Wrong system software for this hardware > System Bootstrap, Version 12.0(6r)T, RELEASE SOFTWARE (fc1) > Copyright (c) 1999 by cisco Systems, Inc. > C3660 processor with 131072 Kbytes of main memory > Main memory is configured to 64 bit mode with parity disabled > > PCMCIA Slot0: No Card Present > > System Bootstrap, Version 12.0(6r)T, RELEASE SOFTWARE (fc1) > Copyright (c) 1999 by cisco Systems, Inc. > C3660 processor with 131072 Kbytes of main memory > Main memory is configured to 64 bit mode with parity disabled > > PCMCIA Slot1: No Card Present > > System Bootstrap, Version 12.0(6r)T, RELEASE SOFTWARE (fc1) > Copyright (c) 1999 by cisco Systems, Inc. > C3660 processor with 131072 Kbytes of main memory > Main memory is configured to 64 bit mode with parity disabled > Nondisclosure violations to [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=55554&t=55504 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
