Are you sure that all of your 3662's are exactly the same. The TELCO chassis requires a TELCO image. It will not have the plastic face plate and a few other minor differences. A standard 3662 will not run the TELCO image.
-- David C Prall [EMAIL PROTECTED] http://dcp.dcptech.com > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of > Hamid Ali Asgari > Sent: Tuesday, October 15, 2002 10:30 AM > To: [EMAIL PROTECTED] > Subject: RE: FW: URGENT: WRONG IOS-Problem booting a 3662 [7:55504] > > > I have tried 3 different IOSs. And I also have put out all the modules. > Currently there are no modules on the router. But still doesn't work. > Hamid > > > The image is working on other 3662 routers, but do are they the EXACT > > same configuration. > > > > Do they all have exactly the same network modules and WIC cards in > > them? > > > > Are all of the module and cards the same code revision? > > > > I would try a different version of the IOS. > > > > -----Original Message----- > > From: Hamid Ali Asgari [mailto:[EMAIL PROTECTED]] > > Sent: Sunday, October 13, 2002 11:21 PM > > To: [EMAIL PROTECTED] > > Subject: Re: FW: URGENT: WRONG IOS-Problem booting a 3662 [7:55504] > > > > > > As I told ALL the images I used, are currently working on other 3662 > > routers > > > > Hamid > > > > > > > >> 3660 uses different ios then the rest of 3600 family. Seem like you > >> have ios for the wrong platform > >> > >> -----Original Message----- > >> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf > > Of > >> Hamid Ali Asgari > >> Sent: Sunday, October 13, 2002 5:04 PM > >> To: [EMAIL PROTECTED] > >> Subject: URGENT: WRONG IOS-Problem booting a 3662 [7:55504] > >> > >> Hi group, > >> > >> I have a Cisco 3662 router with 128 of RAM and 16 Mb of flash memory. > >> The > >> problem is that I cannot make the router boot !!!. Each time I boot > > the > >> router I get the folowing error. > >> I don't know why this error is displayed. I have tried replacing the > >> IOS several times. I have repleaced the flash memory but still it > >> doesn't work. > >> Does it have anything to do with Smart Init? I don't know what it is > >> and how it can be disabled> > >> Any input would be welcome, > >> > >> Thanks, > >> Hamid > >> > >> PS: The IOS that I have tested are currently running on other 3662s. > >> > >> ***************************************************************** > >> > >> System Bootstrap, Version 12.0(6r)T, RELEASE SOFTWARE (fc1) > >> Copyright (c) 1999 by cisco Systems, Inc. > >> C3660 processor with 131072 Kbytes of main memory > >> Main memory is configured to 64 bit mode with parity disabled > >> > >> program load complete, entry point: 0x80008000, size: 0xc26c18 > >> Self decompressing the image : > >> > > ######################################################################## > >> > > ######################################################################## > >> > > ######################################################################## > >> > > ######################################################################## > >> > > ######################################################################## > >> > > ######################################################################## > >> > > ######################################################################## > >> > > ######################################################################## > >> > > ######################################################################## > >> > > ######################################################################## > >> > > ######################################################################## > >> > > ######################################################################## > >> > > ######################################################################## > >> #######################################################! > >> > > ######################################################################## > >> > > ####################################################################### > >> [OK] > >> Smart Init is enabled > >> smart init is sizing iomem > >> ID MEMORY_REQ TYPE > >> 0000B3 0X0009FC00 Dual Port Fast Ethernet > >> 00006F 0X00012580 Sixteen port A/D Modem > >> 00006F 0X00012580 Sixteen port A/D Modem > >> 0X00280000 OIR memory > >> 0X0010A6F8 public buffer pools > >> 0X00211000 public particle pools > >> TOTAL: 0X0065FDF8 > >> > >> If any of the above Memory Requirements are > >> "UNKNOWN", you may be using an unsupported > >> configuration or there is a software problem and > >> system operation may be compromised. > >> Rounded IOMEM up to: 7Mb. > >> Using 5 percent iomem. [7Mb/128Mb] > >> > >> > >> Wrong system software for this hardware > >> System Bootstrap, Version 12.0(6r)T, RELEASE SOFTWARE (fc1) > >> Copyright (c) 1999 by cisco Systems, Inc. > >> C3660 processor with 131072 Kbytes of main memory > >> Main memory is configured to 64 bit mode with parity disabled > >> > >> PCMCIA Slot0: No Card Present > >> > >> System Bootstrap, Version 12.0(6r)T, RELEASE SOFTWARE (fc1) > >> Copyright (c) 1999 by cisco Systems, Inc. > >> C3660 processor with 131072 Kbytes of main memory > >> Main memory is configured to 64 bit mode with parity disabled > >> > >> PCMCIA Slot1: No Card Present > >> > >> System Bootstrap, Version 12.0(6r)T, RELEASE SOFTWARE (fc1) > >> Copyright (c) 1999 by cisco Systems, Inc. > >> C3660 processor with 131072 Kbytes of main memory > >> Main memory is configured to 64 bit mode with parity disabled > >> Nondisclosure violations to [EMAIL PROTECTED] > > Nondisclosure violations to [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=55636&t=55504 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]