What model 2600 exactly are you using? If this is not a 2620 or better with a fast ethernet interface it won't work. The fact that it is a e0/0 and not a fa0/0 tells me that you can't do it.
-Drew -----Original Message----- From: Rajesh Kumar [mailto:pikumar@;cisco.com] Sent: Wednesday, October 23, 2002 7:28 PM To: [EMAIL PROTECTED] Subject: Subinterface config. in CAT3550. [7:56174] Hi all, I am trying to configure a router on a stick configuration - with 26xx series router's e0/0 port connected to fa0/1 port of CAT3550. Router's E0 port is configured like this int e0/1 no shu no ip address int e0/1.1 encap isl 20 ip address 192.168.20.1 255.255.255.0 int e0/1.2 encap isl 40 ip address 192.168.40.1 255.255.255.0 When I try to do the same thing on CAT 3550's fa0/1 port, I get an error message like this : " Configuring IP routing on LAN subinterface is only allowed if that subinterface is configured as a part of IEEE 802.10 or dot1q or ISL VLAN. " But nowhere I find the command "encap isl " to insert this in the subinterfaces. Does anyone has anythoughts on this and how to overcome this? Thanks, Rajesh Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=56176&t=56174 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]