On Wed, 23 Oct 2002, Rajesh Kumar wrote: > " Configuring IP routing on LAN subinterface is only allowed if that > subinterface is configured as a part of IEEE 802.10 or dot1q or ISL > VLAN. " > > But nowhere I find the command "encap isl " to insert this in > the subinterfaces.
Try this: interface FastEthernet0/1 description Router on stick (2600) switchport mode trunk switchport trunk encapsulation isl Off the top of my head, I can't remember if the 3550 only supports dot1q, or ISL, or both. So if the above doesn't work, use dot1q rather than isl on the router, and forget the encapsulation command on the switch. Rgds, - I. -- Ian Henderson CCNA, CCNP Senior Network Engineer, Chime Communications Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=56179&t=56174 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
