On Mar 9, 12:13pm, "Lupi, Guy" wrote:
}
} Ok, I know this is probably a simple issue, but I can't find a resolution.
} I have several 2610 routers that show the following when they are loaded:
}
} Configured I/O Memory Percentage Too Large, using 10%.
What this message means is that it is allocated to buffers versus
the ammount that is used to hold the running image of IOS, routing
tables, etc.
} They then proceed to reload forever. If I go to rommon and skip the system
This means that it probably still didn't have enough memory to
hold the running image of IOS.
Verify that you have enough RAM for the image that you are using.
If you do, verify that you have a good copy of image. Install more
RAM.
}-- End of excerpt from "Lupi, Guy"
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=55868&t=55822
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
