Ok, I know this is probably a simple issue, but I can't find a resolution. I have several 2610 routers that show the following when they are loaded:
Configured I/O Memory Percentage Too Large, using 10%. They then proceed to reload forever. If I go to rommon and skip the system config using 0x2142, same story. So I tried to load a new IOS on one, it took it but still has the same problem. Anyone out there know how I can fix this? Thanks. Guy H. Lupi Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=55822&t=55822 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]