we use mrtg (a freely available network monitoring tool) for a multi-site frame network. we don't own the routers or have legitimate password access to them (our vendor provides as part of the service) so we had the vendor set up an snmp community string (read only) and an access control list on each of the frame routers provided, allowing access by a couple of monitor stations on our network. it has come in very handy. i'm not at work right now but if interested i can send a sanitized version of the config file we use for mrtg (which shows the mibs accessed).
thanks. ----- Original Message ----- From: "YASSER ALY" To: Sent: Saturday, October 19, 2002 12:17 AM Subject: RE: Frame relay circuit speed from IOS? [7:55908] > The short answer for your question is to use " sh frame-relay pvc > > > Here is a link illustrating this > > http://www.cisco.com/en/US/tech/tk713/tk237/technologies_tech_note09186a0080 093c06.shtml > > You can use any other relative command from the show frame-relay family > and check the CIR value, this will be the value that the provider has > configured for your circuit as CIR > > HTH, > > Yasser > > > >"Mossburg, Geoff (MAN-Corporate)" wrote: > > > > All, > > I've got a > problem that has me stumped. I have an external CSU/DSU > > off of > Serial0 at a remote site going to a frame-relay circuit of unknown > > > speed. Is there any way to determine the circuit speed with the router's > > > IOS? I want to be able to get this information remotely from many > sites, >so > > having someone physically look at the CSU/DSU's config is > impractical for > > me. > > Thanks very much! > > GM >-- >David Madland > >CCIE# 2016 >Sr. Network Engineer >Qwest Communications >612-664-3367 > > >"You don't make the poor richer by making the rich poorer." --Winston > misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > ------------------------------------------------------------------------ > > Unlimited Internet access -- and 2 months free! Try MSN. Click Here Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=55941&t=55908 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]