I think you have forgotten to configure the vurtual-template interface and bind it to multilink. Here is a sample:
multi-link virtual-template 1 ! Interface virtual-template 1 ip address 1.2.4.3 peer default address pool pppML encapsulatiopn ppp .... ! ""Hamed Sedighi"" wrote in message news:200210200421.EAA09928@;groupstudy.com... > Hi, > > As I wanted to enable "Multilink", I added "PPP Multilink" command at the end > of a "Group-Async" in my Router config. > But it does not active in my Router. How can I enable "Multilink"? > Please send me a sample of a Router config that is ready to use "Multilink". > > Regards, > Hamed Sedighi Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=56037&t=55957 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]