A minor nitpick here: EIGRP is not a link state protocol but it does use hello messages to establish and keep track of neighbors. Hello messages used by a routing protocol will complicate your DDR situation, but they are not the defining characteristic of link state protocols.
John >>> "Symon Thurlow" 10/22/02 3:05:08 PM >>> I don't think you can use Link State routing protocols over snapshot because they rely on hello messages periodically (not 100% on this but pretty sure). I got it to work in a DDR EIGRP environment using floating statics, quite straight forward. -----Original Message----- From: Cisco Nuts [mailto:cisconuts@;hotmail.com] Sent: 22 October 2002 21:20 To: [EMAIL PROTECTED] Subject: Snapshot routing for Eigrp? [7:56102] Hello, Can snapshot routing be used for Eigrp? I don't see any documentation on CCO regarding this. They refer to primarily RIP, IGRP and IPX RIP. What can be used for Eigrp across a DDR link? Also, I am trying to find out for ISIS? CCO has the ospf-demand circuit for Ospf but nothing for ISIS? Can someone advise? Thank you. Sincerely. _________________________________________________________________ Get faster connections -- switch to MSN Internet Access! http://resourcecenter.msn.com/access/plans/default.asp ============================================= This email has been content filtered and subject to spam filtering. If you consider this email is unsolicited please forward the email to [EMAIL PROTECTED] and request that the sender's domain be blocked from sending any further emails. ============================================= Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=56108&t=56102 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
