Dear Friends, How do I know whether my router support calendar or not. I have a catalyst 5505 switch, and I didn't configure NTP on it but its date and time stay after rebooting. why?
#ntp set ntp broadcastclient disable set ntp broadcastdelay 3000 set ntp client disable set ntp authentication disable set timezone Singapore 8 0 set summertime disable Cat55-L8-1> (enable) sh ntp Current time: Wed Oct 23 2002, 21:17:59 HongKong Timezone: 'Hong Kong', offset from UTC is 8 hours Summertime: '', disabled Last NTP update: Broadcast client mode: disabled Broadcast delay: 3000 microseconds Client mode: disabled Authentication: disabled >From: "Matthew Poole" >Reply-To: "Matthew Poole" >To: [EMAIL PROTECTED] >Subject: Re: why my clock reset after reboot? [7:56120] >Date: Wed, 23 Oct 2002 07:14:22 GMT > >You will always lose the clock when you do a reboot. > >You'll need to set up some sort of NTP server, or use an NTP server out on >the net. > >You could also use another router as an NTP server, however same problem >applies when it reboots! > if you router doesnt support calender, and u dont use ntp , the clock will always reset to 1993 regards ./boisre >""Kenny Smith"" wrote in message >news:200210230334.DAA31963@;groupstudy.com... > > Hi.. Friends, > > > > I set the date and time on my cisco router using the following command > > > > Router#clock set 11:00:00 23 oct 2002 > > Router#wr mem > > > > The time did change when I type Router#sh clock but it was still reset >to > > 00:00 1 March 1993 after reboot. How to make it stay permanently > > > > Thanks in advance > > > > > > > > > > > > > > > > > > > > > > _________________________________________________________________ > > Internet access plans that fit your lifestyle -- join MSN. > > http://resourcecenter.msn.com/access/plans/default.asp _________________________________________________________________ Get faster connections -- switch to MSN Internet Access! http://resourcecenter.msn.com/access/plans/default.asp Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=56131&t=56120 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
