Not entirely true. Some higher end routers, 7500 for example, have a battery backup and are sometimes used as the NTP server since they will not loose their time in the event of power loss/reload.
Dave Matthew Poole wrote: > > You will always lose the clock when you do a reboot. > > You'll need to set up some sort of NTP server, or use an NTP server out on > the net. > > You could also use another router as an NTP server, however same problem > applies when it reboots! > > ""Kenny Smith"" wrote in message > news:200210230334.DAA31963@;groupstudy.com... > > Hi.. Friends, > > > > I set the date and time on my cisco router using the following command > > > > Router#clock set 11:00:00 23 oct 2002 > > Router#wr mem > > > > The time did change when I type Router#sh clock but it was still reset to > > 00:00 1 March 1993 after reboot. How to make it stay permanently > > > > Thanks in advance > > > > > > > > > > > > > > > > > > > > > > _________________________________________________________________ > > Internet access plans that fit your lifestyle -- join MSN. > > http://resourcecenter.msn.com/access/plans/default.asp -- David Madland CCIE# 2016 Sr. Network Engineer Qwest Communications 612-664-3367 "You don't make the poor richer by making the rich poorer." --Winston Churchill Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=56144&t=56120 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
