Thanks to both of you for considering the problem and providing input. I will try both suggestions, and believe that the 'isdn fast-rollover-delay (seconds)' will work.
-------------------------------------------- isdn fast-rollover-delay seconds Configures Time delay between consecutive dial attempts Default Disabled (0 seconds) Description If more than one dialer map is provided for an ISDN interface, this command provides the time to wait (in seconds) after the first map fails before placing a call using the second map. -------------------------------------------- Configuring the fast-rollover-delay to, say, 10 seconds should give the second dialer which has called the busy number a chance to clear before placing the call to the non-busy second number. The dialer load-threshold is currently configured just on Capetown, where I have been originating the calls from, but I have had it configured on both sides with the same results. I'm interested to see if changing this value to 3 will have an effect on the problem. I'll post a results as soon as I get a chance to try these configs. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=56333&t=56257 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]