Judging by where in the sequence the disconnect comes, have you tried turning on debug ppp auth? On the remote end as well, if you can. Mind you, I'm not sure why, on the configs given, the first two channels would come up if that was the problem.
JMcL Dwayne Saunders wrote: > > Hi all can any one tell me why from my config that i can get > the first 2 b > channels up but the second 2 try to dial and the dissconnect I > think I am > missing something very simple. > > 00:02:26: ISDN BRI0/1: isdn_is_bchannel_available: No Free > B-channels > 00:02:26: ISDN BR0/0: Outgoing call id = 0x8005 > 00:02:111669190656: ISDN BR0/0: Event: Call to 0198308308 at 64 > Kb/s9 > 00:02:26: %ISDN-6-LAYER2UP: Layer 2 for Interface BR0/0, TEI 76 > changed to > up > 00:02:26: ISDN BR0/0: received HOST_PROCEEDING call_id 0x8005 > 00:02:26: ISDN BR0/0: received HOST_CONNECT call_id 0x8005 > 00:02:26: %LINK-3-UPDOWN: Interface BRI0/0:1, changed state to > up > 00:02:26: %ISDN-6-CONNECT: Interface BRI0/0:1 is now connected > to 0198308308 > 00:02:26: BR0/0:1 PPP: Treating connection as a callout > 00:02:26: BR0/0:1 PPP: Phase is ESTABLISHING, Active Open > 0:02:26: BR0/0:1 PPP: No remote authentication for call-out > 00:02:26: BR0/0:1 CHAP: Using alternate hostname username > 00:02:26: BR0/0:1 LCP: O CONFREQ [Closed] id 4 len 22 > 00:02:26: BR0/0:1 LCP: MagicNumber 0x30831CF7 > (0x050630831CF7) > 00:02:26: BR0/0:1 LCP: MRRU 1524 (0x110405F4) > 00:02:26: BR0/0:1 LCP: EndpointDisc 1 Local > (0x1308017465736173) > 00:02:26: ISDN BR0/0: Event: Connected to 0198308308 on B1 at > 64 Kb/s > 00:02:27: BR0/0:1 LCP: I CONFREQ [REQsent] id 1 len 33 > 00:02:27: BR0/0:1 LCP: VendorSpecific OUI 0x000001 > (0x00040000) > 00:02:27: BR0/0:1 LCP: MRU 1524 (0x010405F4) > 00:02:27: BR0/0:1 LCP: AuthProto CHAP (0x0305C22305) > 00:02:27: BR0/0:1 LCP: MRRU 1524 (0x110405F4) > 00:02:27: BR0/0:1 LCP: EndpointDisc 1 Local > (0x130801737461636B) > 00:02:27: BR0/0:1 LCP: LinkDiscriminator 24066 (0x17045E02) > 00:02:27: BR0/0:1 LCP: O CONFREJ [REQsent] id 1 len 12 > 00:02:27: BR0/0:1 LCP: VendorSpecific OUI 0x000017 > (0x00040000) > 00:02:27: BR0/0:1 LCP: LinkDiscriminator 24066 (0x17045E02) > 00:02:27: BR0/0:1 LCP: I CONFACK [REQsent] id 4 len 22 > 00:02:27: BR0/0:1 LCP: MagicNumber 0x30831CF7 > (0x050630831CF7) > 00:02:27: BR0/0:1 LCP: MRRU 1524 (0x110405F4) > 00:02:27: BR0/0:1 LCP: EndpointDisc 1 Local > (0x1308017465736173) > 00:02:27: BR0/0:1 LCP: I CONFREQ [ACKrcvd] id 2 len 25 > 00:02:27: BR0/0:1 LCP: MRU 1524 (0x010405F4) > 00:02:27: BR0/0:1 LCP: AuthProto CHAP (0x0305C22305) > 00:02:27: BR0/0:1 LCP: MRRU 1524 (0x110405F4) > 00:02:27: BR0/0:1 LCP: EndpointDisc 1 Local > (0x130801737461636B) > 00:02:27: BR0/0:1 LCP: O CONFACK [ACKrcvd] id 2 len 25 > 00:02:27: BR0/0:1 LCP: MRU 1524 (0x010405F4) > 00:02:27: BR0/0:1 LCP: AuthProto CHAP (0x0305C22305) > 00:02:27: BR0/0:1 LCP: MRRU 1524 (0x110405F4) > 00:02:27: BR0/0:1 LCP: EndpointDisc 1 Local > (0x130801737461636B) > 00:02:27: BR0/0:1 LCP: State is Open > 00:02:27: BR0/0:1 PPP: Phase is AUTHENTICATING, by the peer > 00:02:27: BR0/0:1 CHAP: I CHALLENGE id 1 len 28 from "Dial IP" > 00:02:27: BR0/0:1 CHAP: Using alternate hostname username > 00:02:27: BR0/0:1 CHAP: Username Dial IP not found > 00:02:27: BR0/0:1 CHAP: Using default password > 00:02:27: BR0/0:1 CHAP: O RESPONSE id 1 len 26 from "username" > 00:02:27: ISDN BR0/0: received HOST_DISCONNECT call_id 0x8005 > 00:02:27: ISDN BR0/0: Event: Call to was hung up. > 00:02:27: %LINK-3-UPDOWN: Interface BRI0/0:1, changed state to > down > 00:02:27: BR0/0:1 PPP: Phase is TERMINATING > 00:02:27: BR0/0:1 LCP: State is Closed > 00:02:27: BR0/0:1 PPP: Phase is DOWN > 00:02:42: %ISDN-6-LAYER2DOWN: Layer 2 for Interface BR0/0, TEI > 76 changed to > dow > n > conven02# > conven02# > conven02# > conven02# > conven02# > conven02# > conven02#u all > All possible debugging has been turned off > conven02# > conven02#sh ru > Building configuration... > > Current configuration: > ! > version 12.0 > service timestamps debug uptime > service timestamps log uptime > service password-encryption > ! > hostname conven02 > ! > enable password 7 1511021F0725 > ! > memory-size iomem 10 > ip subnet-zero > no ip domain-lookup > isdn switch-type basic-net3 > ! > ! > ! > interface Ethernet0/0 > description connected to EthernetLAN_1 > ip address 192.168.1.1 255.255.255.0 > no ip directed-broadcast > ip nat inside > ! > interface BRI0/0 > description connected to Internet > no ip address > no ip directed-broadcast > ip nat outside > encapsulation ppp > dialer rotary-group 1 > isdn switch-type basic-net3 > no cdp enable > ! > interface BRI0/1 > description connected to Internet > no ip address > no ip directed-broadcast > ip nat outside > encapsulation ppp > dialer rotary-group 1 > isdn switch-type basic-net3 > no cdp enable > ! > interface Dialer1 > description connected to Internet > ip address negotiated > no ip directed-broadcast > ip nat outside > encapsulation ppp > no ip split-horizon > dialer in-band > dialer string 12345678 > dialer hold-queue 10 > dialer load-threshold 1 outbound > dialer-group 1 > no cdp enable > ppp authentication chap pap callin > ppp chap hostname username > ppp chap password 7 password > ppp pap sent-username tesas password 7 password > ppp multilink > ! > > ! > ip nat inside source list 1 interface Dialer1 overload > ip classless > ip route 0.0.0.0 0.0.0.0 Dialer1 > ! > access-list 1 permit 192.168.1.0 0.0.0.255 > dialer-list 1 protocol ip permit > snmp-server community public RO > ! > line con 0 > exec-timeout 0 0 > password 7 password > login > transport input none > line aux 0 > line vty 0 4 > password 7 password > login > ! > end > > Regards > > D'Wayne Saunders > Data Network Administrator > > Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=56566&t=56498 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
