Hi all can any one tell me why from my config that i can get the first 2 b channels up but the second 2 try to dial and the dissconnect I think I am missing something very simple.
00:02:26: ISDN BRI0/1: isdn_is_bchannel_available: No Free B-channels 00:02:26: ISDN BR0/0: Outgoing call id = 0x8005 00:02:111669190656: ISDN BR0/0: Event: Call to 0198308308 at 64 Kb/s9 00:02:26: %ISDN-6-LAYER2UP: Layer 2 for Interface BR0/0, TEI 76 changed to up 00:02:26: ISDN BR0/0: received HOST_PROCEEDING call_id 0x8005 00:02:26: ISDN BR0/0: received HOST_CONNECT call_id 0x8005 00:02:26: %LINK-3-UPDOWN: Interface BRI0/0:1, changed state to up 00:02:26: %ISDN-6-CONNECT: Interface BRI0/0:1 is now connected to 0198308308 00:02:26: BR0/0:1 PPP: Treating connection as a callout 00:02:26: BR0/0:1 PPP: Phase is ESTABLISHING, Active Open 0:02:26: BR0/0:1 PPP: No remote authentication for call-out 00:02:26: BR0/0:1 CHAP: Using alternate hostname username 00:02:26: BR0/0:1 LCP: O CONFREQ [Closed] id 4 len 22 00:02:26: BR0/0:1 LCP: MagicNumber 0x30831CF7 (0x050630831CF7) 00:02:26: BR0/0:1 LCP: MRRU 1524 (0x110405F4) 00:02:26: BR0/0:1 LCP: EndpointDisc 1 Local (0x1308017465736173) 00:02:26: ISDN BR0/0: Event: Connected to 0198308308 on B1 at 64 Kb/s 00:02:27: BR0/0:1 LCP: I CONFREQ [REQsent] id 1 len 33 00:02:27: BR0/0:1 LCP: VendorSpecific OUI 0x000001 (0x00040000) 00:02:27: BR0/0:1 LCP: MRU 1524 (0x010405F4) 00:02:27: BR0/0:1 LCP: AuthProto CHAP (0x0305C22305) 00:02:27: BR0/0:1 LCP: MRRU 1524 (0x110405F4) 00:02:27: BR0/0:1 LCP: EndpointDisc 1 Local (0x130801737461636B) 00:02:27: BR0/0:1 LCP: LinkDiscriminator 24066 (0x17045E02) 00:02:27: BR0/0:1 LCP: O CONFREJ [REQsent] id 1 len 12 00:02:27: BR0/0:1 LCP: VendorSpecific OUI 0x000017 (0x00040000) 00:02:27: BR0/0:1 LCP: LinkDiscriminator 24066 (0x17045E02) 00:02:27: BR0/0:1 LCP: I CONFACK [REQsent] id 4 len 22 00:02:27: BR0/0:1 LCP: MagicNumber 0x30831CF7 (0x050630831CF7) 00:02:27: BR0/0:1 LCP: MRRU 1524 (0x110405F4) 00:02:27: BR0/0:1 LCP: EndpointDisc 1 Local (0x1308017465736173) 00:02:27: BR0/0:1 LCP: I CONFREQ [ACKrcvd] id 2 len 25 00:02:27: BR0/0:1 LCP: MRU 1524 (0x010405F4) 00:02:27: BR0/0:1 LCP: AuthProto CHAP (0x0305C22305) 00:02:27: BR0/0:1 LCP: MRRU 1524 (0x110405F4) 00:02:27: BR0/0:1 LCP: EndpointDisc 1 Local (0x130801737461636B) 00:02:27: BR0/0:1 LCP: O CONFACK [ACKrcvd] id 2 len 25 00:02:27: BR0/0:1 LCP: MRU 1524 (0x010405F4) 00:02:27: BR0/0:1 LCP: AuthProto CHAP (0x0305C22305) 00:02:27: BR0/0:1 LCP: MRRU 1524 (0x110405F4) 00:02:27: BR0/0:1 LCP: EndpointDisc 1 Local (0x130801737461636B) 00:02:27: BR0/0:1 LCP: State is Open 00:02:27: BR0/0:1 PPP: Phase is AUTHENTICATING, by the peer 00:02:27: BR0/0:1 CHAP: I CHALLENGE id 1 len 28 from "Dial IP" 00:02:27: BR0/0:1 CHAP: Using alternate hostname username 00:02:27: BR0/0:1 CHAP: Username Dial IP not found 00:02:27: BR0/0:1 CHAP: Using default password 00:02:27: BR0/0:1 CHAP: O RESPONSE id 1 len 26 from "username" 00:02:27: ISDN BR0/0: received HOST_DISCONNECT call_id 0x8005 00:02:27: ISDN BR0/0: Event: Call to was hung up. 00:02:27: %LINK-3-UPDOWN: Interface BRI0/0:1, changed state to down 00:02:27: BR0/0:1 PPP: Phase is TERMINATING 00:02:27: BR0/0:1 LCP: State is Closed 00:02:27: BR0/0:1 PPP: Phase is DOWN 00:02:42: %ISDN-6-LAYER2DOWN: Layer 2 for Interface BR0/0, TEI 76 changed to dow n conven02# conven02# conven02# conven02# conven02# conven02# conven02#u all All possible debugging has been turned off conven02# conven02#sh ru Building configuration... Current configuration: ! version 12.0 service timestamps debug uptime service timestamps log uptime service password-encryption ! hostname conven02 ! enable password 7 1511021F0725 ! memory-size iomem 10 ip subnet-zero no ip domain-lookup isdn switch-type basic-net3 ! ! ! interface Ethernet0/0 description connected to EthernetLAN_1 ip address 192.168.1.1 255.255.255.0 no ip directed-broadcast ip nat inside ! interface BRI0/0 description connected to Internet no ip address no ip directed-broadcast ip nat outside encapsulation ppp dialer rotary-group 1 isdn switch-type basic-net3 no cdp enable ! interface BRI0/1 description connected to Internet no ip address no ip directed-broadcast ip nat outside encapsulation ppp dialer rotary-group 1 isdn switch-type basic-net3 no cdp enable ! interface Dialer1 description connected to Internet ip address negotiated no ip directed-broadcast ip nat outside encapsulation ppp no ip split-horizon dialer in-band dialer string 12345678 dialer hold-queue 10 dialer load-threshold 1 outbound dialer-group 1 no cdp enable ppp authentication chap pap callin ppp chap hostname username ppp chap password 7 password ppp pap sent-username tesas password 7 password ppp multilink ! ! ip nat inside source list 1 interface Dialer1 overload ip classless ip route 0.0.0.0 0.0.0.0 Dialer1 ! access-list 1 permit 192.168.1.0 0.0.0.255 dialer-list 1 protocol ip permit snmp-server community public RO ! line con 0 exec-timeout 0 0 password 7 password login transport input none line aux 0 line vty 0 4 password 7 password login ! end Regards D'Wayne Saunders Data Network Administrator Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=56498&t=56498 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
