Hi all -- I'm suffering thru a terrible newbies type problem and cannot seem to identify the error of my ways. I know it's something very basic -- and it brings back memories of high school geometry homework where I stared at objects for hours on end trying to understand!!!
The thrust of my pitiful situation is: I cannot "ping" from hyperterminal -- altho' I can readily "ping" from a DOS prompt on the same PC. I have the parameters set properly 8-N-1-None -- and I have tried with the TFTP server setup on the same PC and on another in my home network (I have 10 pcs in my home network -- most old -- but they still work!). Neither works. Any suggestions. And please don't waste time flaming me -- I know I should be able to figure this out -- but even after researching the archives and CCO, I am no closer to a solution than I am to passing the LAB on the first try!!!!! So any and all helpful suggestions would be welcome. Thanks to all -- in advance!! Greg Macaulay Oldest Human Being preparing for the CCIE Lab Lifetime AARP member Retired Attorney/Law Professor Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=56619&t=56619 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
