Maximus, This is my interpretation:
- When the packet is identified, but not marked classification is said to be on a per hop basis o The classification pertains only to the device that is in on, not passed to the next router o PQ, CQ - When marked for network wide use, IP precedence bits can be set Joe At 11:38 AM 11/4/2002 +0000, \"\"B.J. Wilson\"\" wrote: Hey Proximo - I'm sitting here looking over the outline of the DQOS test, and one of the bullets says to "Explain the difference between classification and marking." I'm looking over the QoS Config Guide, and can't seem to find any clear distinction between the two - the Guide seems to be using the terms interchangeably. Anyone have any insight into this? Thanks, Maximus CCNP, SPQR &i=56792&t=56792 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=56793&t=56792 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
