Nevermind...I found it... TAC's new website is nice, but takes some getting used to. Ctrl-C x 3..... LOL.. ----- Original Message ----- From: r34rv13wm1rr0r To: [EMAIL PROTECTED] Sent: Monday, November 04, 2002 3:33 PM Subject: ***SWITCH CONSOLE COMMAND***
Hello all, When repairing a failed flash in 6509 w/MSFC I had to use the switch console command to be able to set up the boot boot variable for the router since the flash was replaced. I do not have physical access to these boxes on a daily basis but I can reach them via a console server or SSH. Problem is that when I use the console server to get to it it goes directly to the MSFC because during the repair I used the switch console command, I want to switch the console port back to the switch Supervisor but here is what it tells me. SWITCH> (enable) switch console This command is not supported on telnet session OK, if the command is not allowed on a telnet (SSH) session then how do you switch the console port back since I can't "console" into the Supervisor? Seem crazy to be only able to switch it from the console, but the console only works for the MSFC. Thanks!!! Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=56850&t=56850 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
