Hi Simon. PIX cannot have 2 outside interfaces. The interfaces are defined based on the security level and particularly outside and inside interfaces cannot be changed. PIX is not a router and should not be used in place of router. It can have a single default route and cannot support load balancing. You can use a router in front of PIX to do your load balancing and connection to both upstream ISP's.
Regards, Vamsi CCNP,CCDP,CSS1 ----- Original Message ----- From: To: Sent: Wednesday, November 06, 2002 6:58 AM Subject: Need help on PIX [7:56965] > Hi, > I must admit that i am not an expert on PIX...but i have a question..Can you > have 2 outside interfaces on the PIX??? > I have a PIX with an outside interface connected to a router with a link to > an ISP. Can i have another outside interface ex.Outside1 which connects to > another router with a link to another ISP??? I want to do loadbalancing to > these 2 ISPs. > Can i do loadbalancing using static routes??? > Can i do policy routing on the PIX??? For example...i want traffic from some > inside hosts to go out to one ISP and the traffic from remaining hosts to go > via another ISP.Is this possible??? > Would be of great help if someone could point out some documents where i can > get the above info. > > Many thanx > Simon **************************Disclaimer************************************************** Information contained in this E-MAIL being proprietary to Wipro Limited is 'privileged' and 'confidential' and intended for use only by the individual or entity to which it is addressed. You are notified that any use, copying or dissemination of the information contained in the E-MAIL in any manner whatsoever is strictly prohibited. **************************************************************************************** Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=56981&t=56965 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]