Hi group. I have an OLDER model of the Cat 1900 switch that has the DB-9 port (not RJ-45) for console access. I can't find any info on Cisco's site for this model, so I don't know what it's pinout assignment should be. The only way I can console in using the usual connection (e.g. terminal server) is via the Diagnostic mode. My research revealed that apparently this model uses a different DB-9 to RJ-45 pinout. If anyone has any info, I'd greatly appreciate it.
Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=57947&t=57947 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]