What is the best way to rate-limit a subnet on a 3640 (IOS 12.2) ? I've tried the following with no success:
rate-limit input access-group 151 128000 8000 256000 conform-action transmit exceed-action drop rate-limit output access-group 150 128000 8000 256000 conform-action transmit exceed-action drop access-list 150 permit ip any 10.0.0.224 0.0.0.16 access-list 151 permit ip 10.0.0.224 0.0.0.16 any Thanks in advance. Dale -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Mariusz T. Sent: Tuesday, December 03, 2002 12:52 PM To: [EMAIL PROTECTED] Subject: Re: rate-limit question [7:58423] U?ytkownik ""William Lijewski"" napisa3 w wiadomo6ci [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > For rate-limit, is there a default "exceed-action" ? I have been > looking in > the documents and all of the configs I seem to find all have the > "exceed-action drop", what I am wondering is what happens if I leave > the exceed-action command off of the statement? Do the packets that > don't conform still go through unchanged, or do they get dropped? > You simply can't enter rate-limit command without exceed-action statement, at least for IOS 12.2... Regards Mariusz Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=58471&t=58423 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
