the following is configuration of my cat6509:
--- ---- ------------------- ----------- -----------------------------------
---
1 2 WS-X6K-SUP2-2GE SAD053202VH Hw : 2.2
Fw : 6.1(3)
Fw1: 6.1(3)
Sw : 6.3(3)X
Sw1: 6.3(3)X
WS-F6K-PFC2 SAD053301PG Hw : 2.0
2 2 WS-X6K-SUP2-2GE SAD053302C4 Hw : 2.2
Fw : 6.1(3)
Fw1: 6.1(3)
Sw : 6.3(3)X
Sw1: 6.3(3)X
WS-F6K-PFC2 SAD0532034X Hw : 1.4
3 8 WS-X6408A-GBIC SAL05309JZU Hw : 2.0
Fw : 5.4(2)
Sw : 6.3(3)X
4 8 WS-X6408A-GBIC SAL05309K0T Hw : 2.0
Fw : 5.4(2)
Sw : 6.3(3)X
5 48 WS-X6348-RJ-45 SAL0533ALLL Hw : 5.0
Fw : 5.4(2)
Sw : 6.3(3)X
6 8 WS-X6408A-GBIC SAL06261Y3G Hw : 2.1
Fw : 5.4(2)
Sw : 6.3(3)X
15 1 WS-F6K-MSFC2 SAD053201MX Hw : 1.2
Fw : 12.1(8a)E2
Sw : 12.1(8a)E2
16 1 WS-F6K-MSFC2 SAD0532049U Hw : 1.2
Fw : 12.1(8a)E2
Sw : 12.1(8a)E2
And i found in cisco document that 6509 can support vlan range between 1 and
4094.
but when i setup a new vlan as the following ,some mistake happened.
6509> (enable) set vlan 2000
VTP advertisements transmitting temporarily stopped,
and will resume after the command finishes.
Cannot set vlans in extended range.
Reduced Mac Address feature is disabled in NVRAM.
can anyone tell me the reason? thanks in advance.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=58600&t=58600
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
