what CatOS are you running?
set spantree macreduction {enable | disable}
To:
Sent: Thursday, December 05, 2002 12:17 AM
Subject: how to set extended range vlans (vlan number >1024) on [7:58600]
> the following is configuration of my cat6509:
>
> --- ---- ------------------- ----------- ---------------------------------
--
> ---
> 1 2 WS-X6K-SUP2-2GE SAD053202VH Hw : 2.2
> Fw : 6.1(3)
> Fw1: 6.1(3)
> Sw : 6.3(3)X
> Sw1: 6.3(3)X
> WS-F6K-PFC2 SAD053301PG Hw : 2.0
> 2 2 WS-X6K-SUP2-2GE SAD053302C4 Hw : 2.2
> Fw : 6.1(3)
> Fw1: 6.1(3)
> Sw : 6.3(3)X
> Sw1: 6.3(3)X
> WS-F6K-PFC2 SAD0532034X Hw : 1.4
> 3 8 WS-X6408A-GBIC SAL05309JZU Hw : 2.0
> Fw : 5.4(2)
> Sw : 6.3(3)X
> 4 8 WS-X6408A-GBIC SAL05309K0T Hw : 2.0
> Fw : 5.4(2)
> Sw : 6.3(3)X
> 5 48 WS-X6348-RJ-45 SAL0533ALLL Hw : 5.0
> Fw : 5.4(2)
> Sw : 6.3(3)X
> 6 8 WS-X6408A-GBIC SAL06261Y3G Hw : 2.1
> Fw : 5.4(2)
> Sw : 6.3(3)X
> 15 1 WS-F6K-MSFC2 SAD053201MX Hw : 1.2
> Fw : 12.1(8a)E2
> Sw : 12.1(8a)E2
> 16 1 WS-F6K-MSFC2 SAD0532049U Hw : 1.2
> Fw : 12.1(8a)E2
> Sw : 12.1(8a)E2
> And i found in cisco document that 6509 can support vlan range between 1
and
> 4094.
>
> but when i setup a new vlan as the following ,some mistake happened.
>
> 6509> (enable) set vlan 2000
> VTP advertisements transmitting temporarily stopped,
> and will resume after the command finishes.
> Cannot set vlans in extended range.
> Reduced Mac Address feature is disabled in NVRAM.
>
>
> can anyone tell me the reason? thanks in advance.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=58610&t=58610
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
