extended range vlans ( > 1005 ) can only be configured on a switch that is
in VTP transparent mode.

--
TANSTAAFL
"there ain't no such thing as a free lunch"




""jack xu""  wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> the following is configuration of my cat6509:
>
> --- ---- ------------------- ----------- ---------------------------------
--
> ---
> 1   2    WS-X6K-SUP2-2GE     SAD053202VH Hw : 2.2
>                                          Fw : 6.1(3)
>                                          Fw1: 6.1(3)
>                                          Sw : 6.3(3)X
>                                          Sw1: 6.3(3)X
>          WS-F6K-PFC2         SAD053301PG Hw : 2.0
> 2   2    WS-X6K-SUP2-2GE     SAD053302C4 Hw : 2.2
>                                          Fw : 6.1(3)
>                                          Fw1: 6.1(3)
>                                          Sw : 6.3(3)X
>                                          Sw1: 6.3(3)X
>          WS-F6K-PFC2         SAD0532034X Hw : 1.4
> 3   8    WS-X6408A-GBIC      SAL05309JZU Hw : 2.0
>                                          Fw : 5.4(2)
>                                          Sw : 6.3(3)X
> 4   8    WS-X6408A-GBIC      SAL05309K0T Hw : 2.0
>                                          Fw : 5.4(2)
>                                          Sw : 6.3(3)X
> 5   48   WS-X6348-RJ-45      SAL0533ALLL Hw : 5.0
>                                          Fw : 5.4(2)
>                                          Sw : 6.3(3)X
> 6   8    WS-X6408A-GBIC      SAL06261Y3G Hw : 2.1
>                                          Fw : 5.4(2)
>                                          Sw : 6.3(3)X
> 15  1    WS-F6K-MSFC2        SAD053201MX Hw : 1.2
>                                          Fw : 12.1(8a)E2
>                                          Sw : 12.1(8a)E2
> 16  1    WS-F6K-MSFC2        SAD0532049U Hw : 1.2
>                                          Fw : 12.1(8a)E2
>                                          Sw : 12.1(8a)E2
> And i found in cisco document that 6509 can support vlan range between 1
and
> 4094.
>
> but when i setup a new vlan  as the following ,some mistake happened.
>
> 6509> (enable) set vlan 2000
> VTP advertisements transmitting temporarily stopped,
> and will resume after the command finishes.
> Cannot set vlans in extended range.
> Reduced Mac Address feature is disabled in NVRAM.
>
>
> can anyone tell me the reason? thanks in advance.




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=58617&t=58617
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to