All u need to do is create a static Private to Public address on the PIX. However, user in the inside will access the server via the Private address. Therefore, the packet will not leave the inside interface and come by in.
Greg Owens -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Sent: Thursday, December 05, 2002 10:22 AM To: [EMAIL PROTECTED] Subject: PIX question [7:58623] If I have a pix seperating my network from the internet with an inside and an outside interface, then I have some servers on the inside network that I use Static to give an ip address on the outside network for host4s on the internet to access. that4s the easy part, now the question Is it possible for the inside hosts to access the servers that I have using the public ip address, I.E. as my inside hosts wear accessing them from the internet, so they would go out the pix and then back in using the public IP address of the server they are connecting to. does this make any sense ? Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=58632&t=58623 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
