The cable you mentioned should work. The AC power supplies on a 7000 and a 7507 are the same. (Unless changed recently.) FWIW They shipped the same cord with Cat5K Power Supplies even though there is no notch on the PS receptacle end. Any chance that they sent you a cable for a 7513? It has a big square end for the PS and has a 20amp plug end. What does your cable look like?
> -----Original Message----- > From: NetEng [mailto:[EMAIL PROTECTED]] > Sent: Thursday, December 05, 2002 8:38 AM > To: [EMAIL PROTECTED] > Subject: Power Cable for 7000 [7:58616] > > > I bought a Cisco 7000 router at an auction. It did not come > with a power > cable > and I can not find one for the life of me. I ordered and > received CAB-7KAC=, > but this cable does not fit. It says on the package thats its > a 7500 series > AC power cord. On ciscos website its says to order this cable > but, again, it > does not fit. Below is a layout of the power supply > connector. Does anyone > know the correct power cable to order (and where) to get it? TIA . The > connector is like evey other one (router/monitor/PC) except > it has a small > ridge between the top prongs. > > ________ > | [] U [] | > | | > | [] | > ------------ Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=58637&t=58616 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
