I had a similar problem on my 2610 , I bought a smartnet package and got the box replaced from Cisco .
Navin Parwal ""R M"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > I've been working a few hours with a 2610 when suddenly, boom!!, I lost my > console connection, now it doesn't respond to Ctrl-Break nor anything, I've > rebooted it several times but it doesn't shows any single character on > HyperTerminal. Unfortunately, the equipment is running (almost) default > configuration, so now I can't get in through Aux or Vty. My Aux port respond > but can't do much through it since no 'enable password' has been provided by > default, so can't get to privileged mode. Once the box is booted, it looks > good, its eth and serial interfaces comes up, so it doesn't looks like a > flash or IOS corruption problem. > > Do you guys have any clue why I'm suffering this? > Any workaround to at least have privileged access through Aux?? > Maybe nvram got corrupted? there's any way to 'hard' reset nvram through > internal jumpers?? > > Thanks very much in advance, > > RM. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=58955&t=58889 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
