I am getting many output and input errors between 2 brand new 4006s (version
12.1(8a)EW1) and 3640 routers. First of all what exactly are output and
input errors (please give more than what it says on the Cisco site) and why
are they caused? How do I fix them or do I need to???
Here is the "show int" between the Cat4K and the 3640's. Note 10Mb half
duplex setting.
Do the runts have anything to do with the input errors??
Also, I see no corresponding errors on the 3640 ports.
thanks,
Mary
First 3640:
sho int gig3/10
GigabitEthernet3/10 is up, line protocol is up
Hardware is Gigabit Ethernet Port, address is 0008.e3a9.1139 (bia
0008.e3a9.1139)
Description:
MTU 1500 bytes, BW 10000 Kbit, DLY 10 usec,
reliability 249/255, txload 12/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Half-duplex, 10Mb/s
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:23, output never, output hang never
Last clearing of "show interface" counters 1d19h
Input queue: 0/2000/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 40000 bits/sec, 34 packets/sec
5 minute output rate 472000 bits/sec, 59 packets/sec
3800050 packets input, 668905159 bytes, 0 no buffer
Received 41421 broadcasts, 142835 runts, 0 giants, 0 throttles
143481 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 input packets with dribble condition detected
6267861 packets output, 3015668941 bytes, 0 underruns
259635 output errors, 97281 collisions, 0 interface resets
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier
0 output buffer failures, 0 output buffers swapped out
Seconf 3640:
GigabitEthernet3/2 is up, line protocol is up
Hardware is Gigabit Ethernet Port, address is 0008.e3a9.1ec9 (bia
0008.e3a9.1ec9)
Description:
MTU 1500 bytes, BW 10000 Kbit, DLY 10 usec,
reliability 244/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Half-duplex, 10Mb/s
ARP type: ARPA, ARP Timeout 04:00:00
Last input never, output never, output hang never
Last clearing of "show interface" counters 1d23h
Input queue: 79/2000/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
2307393 packets input, 974229114 bytes, 0 no buffer
Received 1816 broadcasts, 61458 runts, 0 giants, 0 throttles
61462 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 input packets with dribble condition detected
3796884 packets output, 1389904066 bytes, 0 underruns
227519 output errors, 43183 collisions, 0 interface resets
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier
0 output buffer failures, 0 output buffers swapped out
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=59171&t=59171
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
