Thin blade connector? Are you referring to a smart serial interface? Check the IOS version and make sure it is compatible with the module. If that doesnt work, I'd say you've got a bad card.
thanks, -Brad Ellis CCIE#5796 (R&S / Security) Network Learning Inc [EMAIL PROTECTED] www.optsys.net (Cisco hardware) ""Phil Lorenz"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > I have a 2620 here @ the house and I purchased a new WIC-1T, with the > semi annoying thin blade connector, off of Ebay. I installed the > interface and it is not recognized by the router. I replaced this > module with a known good WIC-2T and everything worked perfectly. > > > > Any advice here? > > > > Thanks > > Phil Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=59240&t=59223 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]