Jim, Based upon 12.1 IOS... See CCO for docs on how to copy a replacement image onto the router.. http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/ fun_c/fcprt2/fcd203.htm
You obviously have local access to the device, as assumed by the output you have posted; from the console session, check the boot parameters with a "SHOW BOOTVAR". If you are sure the flash memory is not damaged, then I would format the flash, and then tftp a new copy of the IOS image onto it. See CCO for information on setting the boot variable. http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/ fun_c/fcprt2/fcd205.htm#xtocid2 HTHs, Mark -----Original Message----- From: Walker, James - Is [mailto:[EMAIL PROTECTED]] Sent: Thursday, December 26, 2002 4:33 PM To: [EMAIL PROTECTED] Subject: 4500 Series Router [7:59806] All, Anyone know how to recover from a empty flash on a 4500 series router? I'm getting the following message: device does not contain a valid magic number boot: cannot open "bootflash:" an alternate boot helper program is not specified (monitor variable "BOOTLDR" is not set) and unable to determine first file in bootflash loadprog: error - on file open boot: cannot load "cisco2-C4500" I combed the CCO, no luck. TIA Jim Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=59814&t=59806 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]