Ok, I think that problem was in "aaa" authentication and "encapsulation ppp". If you configure "encapsulation ppp" in the interface and you enable "aaa" you need put "ppp pap sentusername" in the interface, and add users for the authentication.
Other problem is the bandwidth in the BUS is exceded, for solve this problem, the best solution is you put the PA-A3-OC3 only o single in the BUS and don't share the BUS with other PA. -- -- Alfredo Pulido [EMAIL PROTECTED] Dept. Sistemas, IdecNet S.A. Juan XXIII 44 // E-35004 Las Palmas de Gran Canaria, Las Palmas // SPAIN Tel: +34 828 111 000 Fax: +34 828 111 112 http://www.idecnet.com/ -- ""Alfredo Pulido"" escribis en el mensaje [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hello people, > I have a problem in my 7206 when I insert a Port Adapter ATM OC3 (PA-A3-OC3) > in the chassis, then the Multilink of E1's is down. > > This device has a PA-8T-V35, in this PA is possible run E1 connections, and > PA-FE-TX. > In this router there are 5 E1 connections, 3 E1 connections are group in a > multilink, and the others 2 E1 aren't group. > So the router run perfectly, but the problem take place when I insert the > PA-A3-OC3, the Multilink E1 is down. > > Can anybody help me? > > Regards to all, and Happy new year. > > > > > > -- > -- > Alfredo Pulido [EMAIL PROTECTED] > Dept. Sistemas, IdecNet S.A. > Juan XXIII 44 // E-35004 Las Palmas de Gran Canaria, > Las Palmas // SPAIN > Tel: +34 828 111 000 Fax: +34 828 111 112 > http://www.idecnet.com/ > -- Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=60101&t=59959 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
