Hello folks, Somehow I got into a "back-to-back" conversation with one of our colleagues and nobody else has been responding. :-{} So I decided to repost with the remaining questions. It's a production bank network, so he is hoping to get some answers before trying anything.
Two 6xxx switches are connected back-to-back across a trunk link with 2 sets of ports channeled together to form the trunk. To solve a problem, he needs to make a permanent CAM entry on one of the switches that associates a MAC address with the trunk. Since it's a channel, we're not sure which mod/ports to use as parameters to the "set cam perm" command. Supervisor port 1/1, 1/2 or both? When you do a "set cam perm" on a trunk, documentation says you have to include a VLAN number. The trunk is part of the management VLAN. Is that the VLAN it wants? Or does it want the VLAN that the destination is on? (Hopefully that VLAN is already associated with the trunk.) For more background, see the dicussion on Cat 6xxx and firewalls in a cluster, but I think our best hope at this point is to get answers to these specific questions. THANKS Priscilla Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=60448&t=60448 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]