We just noticed the Serial Interface of our CIsco 2600 router is down,
here is its current status
Serial0/0 is down, line protocol is down
Hardware is PQUICC with Fractional T1 CSU/DSU
Internet address is A.B.C.D
MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec,
reliability 253/255, txload 1/255, rxload 1/255
Encapsulation HDLC, loopback not set
Keepalive set (10 sec)
Last input 00:27:48, output 00:27:43, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/1754 (size/max/drops); Total output drops: 1208
Queueing strategy: weighted fair
Output queue: 0/1000/64/1191 (size/max total/threshold/drops)
Conversations 0/53/256 (active/max active/max total)
Reserved Conversations 0/0 (allocated/max allocated)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
83316984 packets input, 2394378579 bytes, 0 no buffer
Received 507747 broadcasts, 0 runts, 2 giants, 0 throttles
294 input errors, 201 CRC, 88 frame, 0 overrun, 0 ignored, 4 abort
80768969 packets output, 3501265478 bytes, 0 underruns
0 output errors, 0 collisions, 60 interface resets
0 output buffer failures, 0 output buffers swapped out
2 carrier transitions
DCD=down DSR=up DTR=up RTS=up CTS=down
If some one shed any light on it.
thanks,
--
Curious
MCSE, CCNP
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=61220&t=61220
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
