Report the link to your Telco.
-----Original Message----- From: Curious [mailto:[EMAIL PROTECTED]] Sent: 16 January 2003 21:43 To: [EMAIL PROTECTED] Subject: Serial Interface Down [7:61220] We just noticed the Serial Interface of our CIsco 2600 router is down, here is its current status Serial0/0 is down, line protocol is down Hardware is PQUICC with Fractional T1 CSU/DSU Internet address is A.B.C.D MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec, reliability 253/255, txload 1/255, rxload 1/255 Encapsulation HDLC, loopback not set Keepalive set (10 sec) Last input 00:27:48, output 00:27:43, output hang never Last clearing of "show interface" counters never Input queue: 0/75/1754 (size/max/drops); Total output drops: 1208 Queueing strategy: weighted fair Output queue: 0/1000/64/1191 (size/max total/threshold/drops) Conversations 0/53/256 (active/max active/max total) Reserved Conversations 0/0 (allocated/max allocated) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 83316984 packets input, 2394378579 bytes, 0 no buffer Received 507747 broadcasts, 0 runts, 2 giants, 0 throttles 294 input errors, 201 CRC, 88 frame, 0 overrun, 0 ignored, 4 abort 80768969 packets output, 3501265478 bytes, 0 underruns 0 output errors, 0 collisions, 60 interface resets 0 output buffer failures, 0 output buffers swapped out 2 carrier transitions DCD=down DSR=up DTR=up RTS=up CTS=down If some one shed any light on it. thanks, -- Curious MCSE, CCNP Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=61250&t=61220 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
