Hi All, Just wondering if anyone has figures for the size of rx buffers for cat 4000 ports? Had a issue today where a port was connected to a pix 535 manually set at half/100 (yep you read right), the switch port was at auto/auto. The rate of In-Lost (rx buffer filling up) errors was on average 5 per minute (among all the other errors of course).
I have seen In-Lost and delay-exceeds rise up for mis-settings to servers, but the pix connection was showing some pretty fast counter stats Hard to find these small details sometimes in doco.. maybe anyone here from cisco can advise? the mod on the 4006 is a ws-x4424-gb-rj45 (hw 1.5) with a supII (hw 3.2, gsp 7.1(2.0), nmp 7.1(2)) Cheers, M Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=61248&t=61248 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
