I went in the lab and it didn't work. I pulled a flash card out of the 3660 that had an image on it and also copied the running config onto the flash then pulled it out and plugged it into a 3640, it did not see either file.
Dave Edward Sohn wrote: > Dave, > > I actually had a similar concern a few weeks ago. According to this > link, it IS in fact possible for Mario to do so, because all 3600 > routers appear to use filesystem class "B". > > http://www.cisco.com/warp/public/63/pcmciamatrix.html > > Ed > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of > MADMAN > Sent: Monday, January 20, 2003 2:43 PM > To: [EMAIL PROTECTED] > Subject: Re: Loading IOS [7:61413] > > > No > > Dave > > [EMAIL PROTECTED] wrote: > >>I am curious to know if it is possible to load 3660 IOS code to a >>PCMCIA card on a 3640 if all I am wanting to do is get the IOS on the > > flash card. > >>I am not trying to load the 3640 router with the 3660 IOS. I am just > > in > >>need of getting this IOS for a 3660 on a flash card but I dont have a >>3660 at my present location so I thought about using my 3640. >> >> >>Thanks, >> >>Mario > -- David Madland CCIE# 2016 Sr. Network Engineer Qwest Communications 612-664-3367 "You don't make the poor richer by making the rich poorer." --Winston Churchill Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=61457&t=61413 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]