At 7:22 PM +0000 1/25/03, Daniel Cotts wrote: >Here's an old post: >"The password recovery >on a LS100 is unbeliveably complicated.
"The password recovery" is superfluous. Cisco can only defend the LS100 by mentioning they didn't design it, but put their label on it. Honestly, I found things that I had to load with binary or hex switches more intuitively obvious. If, before I had seen the LS100, someone had told me that anyone would implement a command line with 14 positional parameters, with no help or editing, I would have had hysterics. I'll have to admit I used the LS100 in my ATM class, but it's one of those things I've tried hard to forget. >You have to >enter a very cryptic string from a hidden menu on the >LS100. I had to do it on mine, so you'll need to call >TAC and open a case to get this resolved." >I believe that the default password is "c". (Just the letter not the >quotes.) >Please post the solution. > >> -----Original Message----- >> From: XY HIEN LE [mailto:[EMAIL PROTECTED]] >> Sent: Saturday, January 25, 2003 12:28 AM >> To: [EMAIL PROTECTED] >> Subject: password recovery for ATM Light Stream LS 100 [7:61837] >> >> >> Does any one know the procedure of how to do the password recovery for >> an ATM LightStream LS 100? >> Any help is appreciated. Can't find any link on CCO. >> Xy Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=61887&t=61837 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]